Follow these steps to install your Heritage fireplace.

Before you start

• Check that the installation space meets clearance requirements
• Verify the wall can support the weight of the fireplace
• Ensure gas/electricity supply is available nearby

Step 1: Prepare the wall

Mark the mounting points on the wall. Use a stud finder to locate wall studs for secure mounting.

Step 2: Install mounting bracket

Attach the mounting bracket to the wall, ensuring it is level. Use appropriate wall anchors or studs.

Step 3: Position the fireplace

Carefully lift and position the fireplace onto the mounting bracket. Ensure it is fully seated.

Step 4: Connect services

Connect gas and electrical lines according to local codes. Have a qualified technician perform this work if needed.

Step 5: Test operation

Turn on the fireplace and verify proper operation of all controls.

Step 6: Secure and finish

Ensure all fasteners are tight. Install any decorative trim or bezels as required.